Galaxy S4 Cellebrite Instructions

UME Cable ID #: Cable #100

When transferring contacts from a source device into the Samsung (SCH-R970) using Cellebrite, use the following steps:

1. Select Phone to Phone Transfer from the main menu
2. Select source vendor
3. Select source model
4. Select Source Memory
5. Next
6. Select Samsung CDMA as the target vendor
7. Select SCH-R970 (Android) as the target model
8. Select Target Memory
9. Select Content Types desired for the transfer
10. How to find and turn on USB debugging mode in Android 4.2 and higher

To see the option for USB debugging mode in Android 4.2 or higher, do the following:

• Open up your device’s “Settings”. This can be done by pressing the Menu button while on your home screen and tapping “Settings”
• Tap the “More” tab
• Scroll to the bottom and tap “About Device”
• Scroll to the bottom and tap on “Build number” seven times
  • Make sure you tap seven times. You will see a “Developer mode has been enabled” message pop up (you have unlocked USB debugging mode on Android 4.2 and higher)
  • You will see Developers options available and you can now go in there and check the USB debugging

To enable/disable USB debugging mode, do the following:

• “Settings” -> “More” Tab -> “Developer Options” -> “Debugging” ->” USB debugging”

11. Connect devices to UME36 (Cable #100 for the GS4)

Next