Motorola Electrify 2 Cellebrite Instructions

When transferring contacts from a source device into the Motorola ELECTRIFY 2 (XT881) as the
destination device using the Cellebrite unit, you should use the following steps:
1. Select Source vendor based on device with the information to transfer
2. Select the following for the Target device: Motorola CDMA > XT881 ELECTRIFY 2
3. Attach Motorola ELECTRIFY 2 device as the destination device using Cable 100
4. Follow prompts on Cellebrite screen to select content
5. Make sure USB Connection is activated on the Motorola ELECTRIFY 2 device
6. On Motorola ELECTRIFY 2 device, go to Menu > Settings > Developer options > select check boxes
USB debugging and Stay awake (when present)
7. Make sure Target (Motorola ELECTRIFY 2) is connected and ready for transfer
8. Press Continue
9. Please restore the connection on the Motorola ELECTRIFY 2 device, go to Menu > Settings >
Developer options > clear check boxes USB debugging and Stay awake (when present)
10. Also set Menu > Settings > Security > Screen Lock > select Slide
11. Transfer process will complete.